the project began choosing opposite, cheap, light and flexible material for the belt. The result was a multi-layered handmade one that achieves the demanded design requirements.
First: The cylinder was made from iron and we used the iron because it was a good heat conductor. Then absorbent extraction of the wastewater from the cooling process that was used to cooled glass in the iron cylinder.
Second: Two holes were punctured, the first hole was punctured to put water from it in the iron cylinder, the second hole was punctured to the steam of wastewater get out of the iron cylinder and the iron cylinder put on the heat which was getting out from the machines in the glass factory.
Third: The small fan was put in front of the hole which was punctured. When the small fan turned by smoke we will get energy by connecting the fan with a small generator. And we will reveal the energy which get out from the small fan movement by used small light bulb. Finally, the Amount of energy were measured by a used voltmeter.
Comments